VGF battery projects need 20% local content, says Power Ministry

Updated: 3 days ago
From our archive: we wrote this note after the week shown above, as part of our back catalogue. For anything newer, see the latest posts in this section.
On 24 December 2025 the Ministry of Power told 15 states and NTPC that battery projects under its viability gap funding (VGF) scheme must have at least 20% local content, measured as a share of total project cost, before money from the Power System Development Fund is released. The 20% includes energy management software developed in India. The rule covers grid-scale projects, not business sites, but it rewards the same Indian makers who serve hospitals, campuses and factories.
The Storage Brief, week of 22 December 2025
What changed
The Ministry of Power issued a letter dated 24 December 2025 on purchase preference linked with local content for battery storage under the VGF scheme. It went to the energy secretaries of 15 states and to NTPC. It says states and procuring entities must ensure local content of at least 20% of total project cost for disbursement from the Power System Development Fund. That 20% includes the indigenously developed energy management system software, which an earlier amendment to the VGF guidelines already required. Where tenders were issued without a local content clause, states may take an undertaking from bidders and proceed. The letter was reported on 26 December.
Why it matters
The scheme is large. The second VGF tranche, announced in June 2025, puts ₹5,400 crore behind 30 GWh of battery storage, at ₹18 lakh per MWh. A local content floor on that volume pulls more Indian value into each project, starting with the energy management software the guidelines already require.
Take an example: a 100 MWh grid battery under the second tranche. At that support rate it would draw about ₹18 crore of VGF (our calculation: 100 MWh × ₹18 lakh = ₹18 crore). If the whole project cost ₹100 crore, at least ₹20 crore of it would need to be local content before that money flows (our calculation: 20% of ₹100 crore = ₹20 crore).
The letter also settles a point some states were unsure about. Battery storage isn't on the list of items that must be bought only from Class-I local suppliers, so both Class-I and Class-II local suppliers may bid.
The effect reaches business orders too. Makers who build local content for utility tenders also build references, factory capacity and service teams. Those are what a hospital or a lender looks for when choosing who will maintain a battery for years. The letter doesn't touch business sites. It does widen the pool of Indian makers able to stand behind a long service contract, and that's what makes an order financeable.
What it means for you
Sites: No rule changes for you. When comparing quotes, it's fair to ask how much of the system is made or developed in India, especially the software.
Battery makers: Work out your local content share for a typical system, line by line. Treat in-house energy management software as an asset, not an overhead.
Lenders: Local content isn't a credit test, but a maker with Indian software and service depth is easier to rely on over a long contract.
The number
₹18 lakh per MWh: the VGF support per MWh in the second tranche. Source: pv magazine India, 10 June 2025. Our calculation: ₹5,400 crore ÷ 30,000 MWh = ₹18 lakh per MWh, which matches.
What to do now
Makers: prepare a local content statement for your standard system, split by cells, power electronics, enclosure, software and labour.
Makers bidding in open VGF tenders: check whether the procuring state will ask you for a 20% undertaking.
Sites: add a line to your quote request asking which parts, including software, are developed in India.
What we don't know yet
How the 20% will be calculated and checked. The letter states the floor but not the method.
Whether other schemes will adopt a similar local content floor for storage.
Whether the floor will rise in later tranches.
Questions we get asked
Q: Does the 20% local content rule apply to batteries bought by businesses? A: No. It applies to battery projects under the Ministry of Power's VGF scheme supported through the Power System Development Fund.
Q: Do battery cells have to be made in India for VGF projects? A: The letter sets 20% of total project cost as the floor and doesn't say which components must be local. Check the procuring state's tender for any detail it adds.
Key facts
Issued by: Ministry of Power
Date: 24 December 2025
Status: in force (letter issued to 15 states and NTPC)
Applies to: battery storage projects under the VGF scheme supported through the Power System Development Fund
What it means for business batteries: no direct rule for sites, but it builds up the Indian makers who also serve business orders.
Sources
Letter: purchase preference linked with local content for BESS under the VGF Scheme. Ministry of Power, 24 December 2025 (copy hosted by Energética India).
Ministry of Power mandates 20 percent local content for BESS projects under VGF scheme. Energética India, 26 December 2025.
Power ministry announces INR 5,400 crore viability gap funding to support 30 GWh BESS development. pv magazine India, 10 June 2025.
Govt tightens VGF norms for BESS projects; mandates indigenous EMS, bans refurbished cells. Energética India, 5 August 2025.
Keep reading
Newer in Prices & subsidies: China cuts battery export VAT rebates: will imported cells cost more?
Earlier in Prices & subsidies: Storage battery packs fell 45% to $70/kWh: what lenders should do
The bigger picture: Battery cells in 2026: LFP now, sodium-ion next. Should you wait?
Vaultus puts business batteries on a monthly plan. The battery maker installs and maintains the system, the site pays monthly, and the contract sets how much backup it gets. Send your last 12 months of electricity bills and diesel records to contact@vaultus.io, or run your own numbers with the site calculator.
